Call 08046067855 85% Response Rate

Send Email

Rubber Testing Equipment

Offering you a complete choice of products which include cut and chip tester, mdr moving die rheometer, oscillating disc rheometer and mooney viscometer.
Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester
  • Cut And Chip Tester

Cut And Chip Tester

Product Price: Rs 2.25 Lakh / PieceGet Best Price

Product Brochure

Product Details:
BrandSTECH
Model Name/NumberCC - 009
Usage/ApplicationLaboratory
I Deal InNew Only
Cut/Chip Cycle15 - 150 Cycles per minute
Sample Rotation180 - 2880 Revolutions per minute
Test Cycle0.1 - 999 Minutes
Mass at Knife Edge454 gram (others optional)
Electrical200 - 250 V, 6 Amps, 47-63 Hz, Single phase
Sample Size51 mm dia, 13 mm Thickness, 13 mm dia center hole
Country of OriginMade in India
The??Cut and Chip Tester??was orignally invented by??BF Goodrich Co. It was designed to measure the relative service life of off-the-road, farm and heavy duty treads that are subjected to the rigors of traveling on rocky surfaces.
Get Best QuoteRequest A Callback
MDR MOVING DIE RHEOMETER
  • MDR MOVING DIE RHEOMETER
  • MDR MOVING DIE RHEOMETER
  • MDR MOVING DIE RHEOMETER

MDR MOVING DIE RHEOMETER

Get Latest Price

Product Brochure

Product Details:
Model Name/NumberSE-219
BrandSTECH
MaterialMild Steel
Usage/ApplicationLaboratory
Power SourceElectric
Frequency60 Hz
PhaseSingle Phase
Packaging TypeWooden Box
Measured DataTorque (dNM, lbf.in, kgf.cm), Temp (deg C,deg F), Pressure (bar, kg per cm.sq), Time (min - min / mi
Sample Volumeapprox. 4.5 cm3
Pneumaticsmin. 4.5 Bar / 60 psi
Oscillation Strain+/- 0.1 Degree, 0.2 Degree, 0.5 Degree (Standard), 1 Degree or 3 Degree, Mechanically adjustable (+/- 1.4%, 2.8%, 7% (Standard), 1
Data PointsOver 3500 data points available for each test Including S' Min, S' Max, TS 1, TS 2, TC 10, TC 30, TC
Torque Range0.01 to 235 dNm | 0.01 to 208 in.lb
Oscillation Frequency1.667 Hz (100 cpm)
IP RatingIP56
Air Pressure60 PSI (4.2 kg/cm2
Drive SystemMechanical, brushless DC eccentric drive
ElectricalSingle phase 220 V - 230 V, 5 Amps
Test ChamberBi-conical, closed System
StandardsISO 6502 ASTM D 5289 DIN 53529
Country of OriginMade in India

Specifications:

  • Sample volume: About 4.5 cm3
  • Oscillating Amplitude: + 0.5o,1o ,3o
  • Oscillating Frequency: 100 cycles per minute (1.66 HZ)
  • Temperature: Microprocessor controlled
  • Range: 100-200o , PID control
  • Electrical: 220 Volts  AC60 Hz, Single phase
  • Air Pressure: 60 PSI (4.2 kg/cm2, minimum  
  • Air compressor to be user own equipment

Printed Data:

  • Torque: S’@ML, S’’@ML, Tan
  • Delta @MLS’@MH ,S’’@MH, Tan
  • Delta @MH Ts1,Ts2,Ts5,Tc10,Tc50,Tc90 
  • Graphic Output: Elastic Torque S’Tan Delta Viscous  Torque S
  • Testing Standards: ASTM D 5289,ISO 6502.
Get Best QuoteRequest A Callback
Oscillating Disc Rheometer
  • Oscillating Disc Rheometer
  • Oscillating Disc Rheometer
  • Oscillating Disc Rheometer
  • Oscillating Disc Rheometer

Oscillating Disc Rheometer

Get Latest Price

Product Brochure

Product Details:
BrandStech
MaterialMild Steel
Usage/ApplicationLaboratory
Weight275 kg
EnvironmentFree From Dust & Humidity
PanelTable Top (462424 inches)
Sample VolumeApproximately 8 cm3
Air Pressure60 psi (4.2Kg/Sq.Cm) Minimum
Oscillating Disc Frequency100 Cycles/min (1.66Hz)
Oscillating Amplitude10,30,50 (Half Cycle )
Country of OriginMade in India
Specification:  
Sample Volume Approximately 8 cm3
Oscillating Disc Frequency 100 Cycles/min (1.66Hz)
Oscillating Amplitude 10,30,50 (Half Cycle )
Tempature Control Microprocessor Controlled Calibrated Range : 100-2000C Independent Upper And Lower Platen Control
Temp. (Sensor) PT-100 ,Platinum Ressistant
Torque Transducer Directly shaft mounted in line with Oscillating Disk (Reaction Torque Sensor)
Recording & Display Directly On-line Display on VGA Monitor,Memory Storage Data,Automatic Computed Or Results
Printed Data Colour Inkjet Printer
Main Power Supply AC 175-275 V,50 Hz,20 Amp. Maximum
Air Pressure 60 psi (4.2Kg/Sq.Cm) Minimum
Environment Free From Dust & Humidity
Panel Table Top (462424 inches)
Weight 275 kg

Features :

  • Computer controlled automated testing. Repeatability continuous repeated testing. Window Environment : Very easy to operate. Huge capacity of Storage/Data  and Retrieval. Color print out. Multiple color coded graphs for easy separation of batches. Flexible testing timings. Statistical computation of Data. Fast temperature recovery. Automatic computation of at the end of test sequence.
Get Best QuoteRequest A Callback
Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer
  • Mooney Viscometer

Mooney Viscometer

Product Price: Rs 3.5 Lakh / ONWARDSGet Best Price

Minimum Order Quantity: 1 ONWARDS

Product Brochure

Product Details:
BrandSTECH
Model Name/NumberMV - 1000
Usage/ApplicationLaboratory
Type Of Testing MachinesVISCOSITY MEASURING MACHINE
Packaging TypeWooden Box
GradeAutomatic
I Deal InNew Only
Frequency60 Hz
Power1000 W
Voltage220 V
PhaseSINGLE PHASE
Temperature Control SystemAmbient to 232 DegreeC, precision +/-0.03 DegreeC, digital, microprocessor controlled
CalibrationFully automatic by built-in calibration weights, software-guided
Sample VolumeTwo specimens having a combined volume of 25 cm3
Measured DataMooney - value (MU) Temperature ( DegreeC, DegreeF) Time (min - min / min - sec / sec)
Electrical100-120 V, 8 Amps or 200-240 V, 5 Amps, 47-63 Hz, Single phase
Torque Range0.01 to 230 MU
VISCOSITY RPM120 rpm
Pneumaticsmin. 4.5 Bar / 60 psi
StandardsISO 289:2018 ASTM D 1646 | ASTM D 3346 DIN 53523 AFNOR T43-00/005 BS 903: Part 58 | BS 1673 GOST 107
Rotor Shaft SealStandard or long life seals available
Force MeasurementIn-line torque transducer
Temperature Check SystemRecordings of the temperature gradient on the screen, PID microprocessor monitored
Rotor Speed2.00 turns per minute (0.21 Radians / second)
Stress RelaxationAccording to ISO 289:2018, DIN 53523 Part 4
Closing Force11.5 kN
Die Configuration / RotorAccording to international standards large (Dia 38.1 mm) and small (Dia 30.48 mm) Rotor
Country of OriginMade in India

STECH Mooney Viscometers are the leading test instruments for measuring viscosity, scorch, and stress relaxation on polymers and rubber compounds.
By testing the viscous flow of raw materials and masterbatches, Mooney Viscometers maintain stability and consistency in the manufacturing process.
With direct heating and a unique direct drive, the STECH Mooney Viscometer is suitable for quality control or research and development purposes.



Additional Information:

  • Production Capacity: 20 T0 30 PC PER MONTH
  • Delivery Time: 2 to 4 weeks
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Stech Engineers. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.